IndigoXtreme

 

   

Latest News

November 1, 2017

New Indigo Xtreme™ Model available for Skylake-X & Broadwell-E CPUs features easier installation

Optimized for use with water blocks and AIO water coolers, the new Indigo Xtreme for Intel™ Skylake-X & Broadwell-E CPUs can be installed without any operating system or special utilities (such as SpeedFan™/Prime95), making it ideal for new builds. This model also features a wider metal alloy heat path and thin interfacial bondline for maximum thermal performance.

The Indigo Xtreme thermal interface kit for Skylake-X & Broadwell-E includes several cleanroom-grade cleaning products and two complete installations. Please visit our Documentation page to determine compatibility with your specific water block or cooler.

Thank you!
The Enerdyne Team




March 28, 2017

Intel Broadwell-E socket 2011-3 processors and Indigo Xtreme

Enerdyne has determined that the current Indigo Xtreme (IX) model for socket 2011-3 is incompatible with the new Intel Broadwell-E CPUs.

However, IX for socket 2011-0 is fully compatible with the entire Broadwell-E series (6800K, 6850K, 6900K, 6950X). Compatible IX models include: "Indigo Xtreme 2011-X1" & "EK-TIM Indigo Xtreme - Intel 2011".

Thank you!
The Enerdyne Team




December 7, 2015

Full Board/Monoblock and Indigo Xtreme/XS Incompatibility

Enerdyne has determined that Indigo Xtreme (IX) and Indigo XS are incompatible with motherboard blocks (full board blocks & monoblocks). Unlike conventional CPU blocks, motherboard blocks do not rely on compression springs to facilitate thermal contact with the CPU. As a result, there would be insufficient, uniform compressive force to ensure proper IX/XS reflow while providing good thermal contact with the motherboard VRM (MOSFETs).

Please visit our Documentation page to determine compatibility with other water blocks or coolers.

Thank you!
The Enerdyne Team




September 4, 2015

Indigo XS™ fully compatible with Intel™ Skylake Socket 1151 CPUs

Supporting all Socket 115x processors, Indigo XS™ is compatible with latest line of Intel™ Skylake CPUs, including the unlocked Core™ i5 6600K and Core™ i7 6700K. Also available as EK-TIM Indigo XS™ exclusively through EK Water Blocks, Indigo XS possesses ultra-low thermal impedance resulting in unmatched thermal performance. For a list of global distributors and resellers, please visit our Where to Buy page.



Thank you!
The Enerdyne Team




January 19, 2015

EK-TIM Indigo Xtreme™ now available for Intel® 2011-3 (Haswell-E) processors

EK-TIM Indigo Xtreme™ is now available for Intel® socket 2011-3 (Haswell-E) processors. Sold exclusively through EK Water Blocks, EK-TIM Indigo Xtreme may be purchased as a two-application kit or bundled with the award winning EK Supremacy EVO water block. Read More...



Thank you!
The Enerdyne Team




October 30, 2014

New Indigo Xtreme™ model now available for Intel™ Haswell-E socket

The latest addition to the Indigo family of metallic thermal interfaces is the new Indigo Xtreme for Socket 2011-3. Designed exclusively for all Intel Haswell-E CPUs (5960X, 5930K, 5820K), this model features a larger Phase Change Metal Alloy (PCMA) heat path and thinner interfacial bondline for maximum thermal performance.


The Indigo Xtreme thermal interface kit for Socket 2011-3 includes several cleanroom-grade cleaning products and two complete installations. Please visit our Documentation page to determine compatibility with your specific water block or cooler.



Thank you!
The Enerdyne Team




September 8, 2014

Intel Haswell-E socket 2011-3 processors and Indigo Xtreme™ for socket 2011

Enerdyne has determined that the current Indigo Xtreme (IX) model for socket 2011 is incompatible with the new Intel socket 2011-3 CPUs (5960X, 5930K, 5820K). The IHS (CPU lid) used for the 2011-3 (Haswell-E) CPUs is significantly larger than the lid used on 2011-0 generation CPUs. If installed, the thick, blue stiffening member on the current IX for socket 2011 would be sandwiched between the cooler surface and CPU lid, resulting in a total reflow failure. Launch information for a socket 2011-3 compatible model will be posted on the IndigoXtreme.com in the next few weeks.



Thank you!
The Enerdyne Team




May 1, 2014

Indigo Xtreme™ and XS™ now available at Fry's Electronics

Fry's Electronics, the consumer electronics and computer hardware superstore chain, is now stocking Indigo Xtreme™ and Indigo XS™ kits in all of its 34 stores. For a list of retail locations or for online purchases, go to: www.Frys.com



Thank you!
The Enerdyne Team




November 1, 2013

New Indigo XS™ Metallic Thermal Interface
for Socket 1150/1155/1156 CPUs

Indigo XS is the latest generation of ultra-performance engineered thermal interfaces (TIMs) from Enerdyne Solutions.

With a new alloy boasting a bulk thermal conductivity of 40 W/mK, Indigo XS performance is unmatched by any other TIM available today.

Key feature/benefits:
    • Bulk thermal conductivity 4-6X higher than best grease/paste TIMs
    • Compatible with all Intel™ 1150/1155/1156 CPUs, including Haswell
    • Optimized for watercooled systems
    • Highest thermal performance of any TIM, including Indigo Xtreme!

Indigo XS is designed specifically for the thermal professional or extreme enthusiast seeking ultimate performance at the very highest CPU power and frequency levels.



Indigo XS is offered as a thermal interface kit, which includes several cleanroom-grade surface cleaning products for (2) complete installations.

Thank you!
The Enerdyne Team




June 28, 2013

Intel Haswell socket 1150 processors and Indigo Xtreme for socket 1155/6

Enerdyne has determined that the current Indigo Xtreme (IX) model for sockets 1155/6 is incompatible with the new Intel socket 1150 CPUs. Testing has determined that the socket 1155/6 IX excessively overhangs the smaller Haswell Integrated Heat Spreader (IHS), resulting in failed installation and possible alloy leakage.

Launch information for an 1150 compatible model will be posted on the IndigoXtreme.com website soon.

Thank you!
The Enerdyne Team




April 1, 2013
New Indigo Xtreme™ Review and Installation Video. Read more...



February 5, 2013
New Indigo Xtreme™ Model for the latest AMD FX™ CPUs. Read more...



December 7, 2012
Updated Cooler Compatibility Application Note. Now available here...



November 5, 2012
Important new installation recommendations for all Indigo Xtreme™ models. Read More...



November 1, 2012
New Application Note for the Corsair™ H60/80/100 coolers now available here.



September 17, 2012
Updated Installation Guides, new Application Notes for the Noctua™ NH-D14 cooler, EK Supreme™; and Supremacy™ water blocks now available.



September 7, 2012
EK-Supremacy water block and Indigo Xtreme™ premium bundle now available. Read More



June 22, 2012
Indigo Xtreme™ is now available in single packs. Order yours today
single pack



June 22, 2012
Indigo Xtreme™ in Europe is now sold as EK Waterblocks' EK-TIM Indigo Xtreme. Read More...




    This page last modified Friday November 15, 2013
Indigo Xtreme


Copyright © 2011 Enerdyne Solutions Inc. All rights reserved.           ™ Product names, logos, brands, and other trademarks are the property of their respective trademark holders.